On the evening of October 29, 2026, China's three construction machinery leaders handed in their third-quarter reports on the same night: SANY Heavy Industry, XCMG Machinery and Zoomlion disclosed one after another. On the same day, Caterpillar released its Q3 2026 results, and Komatsu also published fiscal-quarter data through September. Laid side by side, these five scorecards revealed a counterintuitive phenomenon — revenue was almost uniformly rising, yet profit traced three curves heading in completely different directions. Revenue is up across the board, but the income statement looks "ugly": who exactly should take the blame? The answer lies not in the factory, but in the exchange rate.

Q3 report comparison of SANY, XCMG and Zoomlion

The Three Giants' Scorecards: Revenue Rises Together, Profit Splits Three Ways

Let's put the hard numbers on the table first. Under the Q3 disclosure basis, all four major domestic OEMs posted steady revenue growth in the third quarter, while earnings clearly diverged:

Company9M revenue (RMB bn)YoY9M net profit attributable to parent (RMB bn)YoYQ3 single-quarter net profit YoY
SANY Heavy Industry78.11+18.81%8.004+12.22%+20.62%
XCMG Machinery86.888+11.17%5.608-6.18%+1.66%
Zoomlion40.019+7.71%2.961-24.46%-25.66%

The three curves are clear:

  • SANY Heavy Industry is the only one of the three that grew both revenue and profit in the first nine months, and it is still accelerating on a single-quarter basis — Q3 net profit attributable to the parent was RMB 2.314 billion, with growth stepping up to 20.62%, faster than the pace in the first half. However, its net profit excluding non-recurring items was RMB 6.724 billion, down 5.38% YoY, so part of the apparent growth did not come from the core business.
  • XCMG Machinery leads on revenue scale (RMB 86.888 billion), but net profit attributable to the parent fell 6.18% YoY; on a single-quarter basis, Q3 net profit of RMB 1.646 billion turned to +1.66% YoY, and the decline has stopped.
  • Zoomlion shows the largest apparent drop: nine-month net profit attributable to the parent of RMB 2.961 billion, down 24.46% YoY. But single-quarter net profit excluding non-recurring items attributable to the parent was RMB 757 million, up 5.39% YoY and up a sharp 229.89% QoQ; gross margin recovered to 27.76%, 1.73 percentage points higher than in Q2.

The same divergence is confirmed by Guojin Securities' data: in 26Q3, revenue at SANY, XCMG, LiuGong and Zoomlion grew 17.0%, 9.8%, 9.1% and 4.7% YoY respectively; net profit attributable to the parent grew 20.6%, 1.7% and 14.7% for SANY, XCMG and LiuGong respectively, while Zoomlion remained in negative growth.

The Real Culprit Isn't the Core Business — It's the Exchange Rate

The biggest common variable behind the profit divergence of the three companies is FX gains and losses, not the core business itself.

How exchange rates affect construction machinery profits
  • SANY Heavy Industry: FX losses of about RMB 2.97 billion in the first nine months, versus FX gains of about RMB 280 million in the same period last year — a swing of RMB 3.25 billion. Excluding this impact, the sales margin could be nearly 4 percentage points higher.
  • XCMG Machinery: financial expenses of about RMB 2.15 billion in the first nine months, versus only about RMB 250 million a year earlier, mainly because FX losses rose sharply (financial expenses up 764.48% YoY). Excluding FX losses, operating net profit was about RMB 7.1 billion, up about 25% YoY, implying a margin of about 8.2%.
  • Zoomlion: excluding the FX impact, net profit attributable to the parent was RMB 3.781 billion, up 1.87% YoY, again returning to positive growth. The company stressed that these FX losses are a temporary, book-level effect of exchange-rate movements; most of the related positions were unsettled at the end of the reporting period and do not directly correspond to an operating cash outflow in the current period.

This is not an isolated case. According to Wind statistics, among 22 listed construction machinery companies in the sample, FX fluctuations in the first half alone dealt overall sector profit an adverse hit of about RMB 7.9 billion. In other words, the "ugly" income statement of the construction machinery industry over the first nine months of 2026 is largely a concentrated manifestation of the mismatch between the accounting currency and the revenue currency after deeper global expansion — not a reversal of the domestic core business or of overseas demand themselves.

Overseas Share Passes Half Across the Board, but Cushions Differ in Thickness

Faced with the same FX hit, the three companies differ in how much they can absorb, and the difference lies in the thickness of the gross margin on their overseas businesses.

  • SANY Heavy Industry: overseas revenue accounted for 61.3% in the first nine months; the overseas gross margin is markedly higher than the domestic market and contributed roughly 70% of core gross profit, lifting the overall gross margin to 28% (27.99% over the first nine months, up 0.37 percentage points YoY). SANY has the thickest overseas profit cushion.
  • Zoomlion: overseas revenue of RMB 23.137 billion, up 8.55% YoY, accounting for 57.81% of the total, up 0.45 percentage points YoY; domestic revenue of RMB 16.882 billion, up 6.57% YoY. Sales across its ten major overseas regions — Europe, Southeast Asia, Africa, South America, the Middle East, Central Asia, South Asia and others — are very evenly distributed, effectively reducing the impact of volatility in any single market.
  • XCMG Machinery: overseas revenue of RMB 45.41 billion in the first nine months, up 20.8% YoY, with the share rising to 56.5%.

Of the three, Zoomlion has the most impressive operating-quality metrics: net operating cash flow of RMB 3.552 billion in the first nine months, up 23.94% YoY, and a cash collection rate of 103.65%, up 1.06 percentage points YoY. XCMG's net operating cash flow was RMB 4.358 billion, down 23.42% YoY, mainly because it reduced interest-bearing debt and optimized its asset-liability structure.

To see the full picture of Chinese brands building plants and investing in channels overseas, read our earlier analysis: Exports of $53.5 Billion: Construction Machinery Turns to Overseas Plant Building.

Global View: Caterpillar Cashes In on Data Centers, Komatsu Slapped by Profit

Comparison of global construction machinery giants

Zooming out, the international peers are not having an easy time either.

Caterpillar beat expectations in Q3 2026: quarterly revenue of $20.7 billion, up 17% YoY (against an expected $20.55 billion); adjusted EPS of $7.20, far above $4.95 a year earlier. The backlog swelled to a record $78.1 billion, up $6 billion QoQ. The full-year tariff cost estimate of about $2.2 billion is unchanged, and the FY2026 revenue growth guidance stays in the "mid-to-high teens" range. Notably, Caterpillar's stock has fallen more than 20% since August — the market is worried whether the demand for construction equipment and generator sets created by data-center investment can last.

Komatsu is the classic case of "revenue up, profit not." FY2026 Q2 (July-September) revenue was JPY 1,115.5 billion, up 13.6% YoY and a record high for any single quarter; but operating profit was JPY 135.1 billion, down 1.2% YoY, with a margin of 12.1%, narrowing 1.8 percentage points YoY. After the earnings release, the stock plunged 9.29% in a single day to JPY 6,182. Komatsu also raised its full-year demand guidance for seven major product lines from +5% to +5%~+10%; North American demand grew 14% YoY in the second quarter, as data-center investment is driving rental demand.

An interesting contrast: both Caterpillar's and Komatsu's North American demand points at data centers, while the growth of China's three giants comes from exports and the replacement cycle. Different drivers, but both are being squeezed by costs and exchange rates.

Has the Industry Actually Turned the Corner?

To judge a cyclical turning point, look at three sets of data.

The first is the industry-wide aggregate. Wind statistics show that the construction machinery industry's overall revenue in the first nine months of 2026 was RMB 335.8 billion, up 13.4% YoY; net profit was RMB 27.4 billion, down 4% YoY. On a single-quarter basis, Q3 revenue rose 11.5% YoY and net profit fell 0.5% — a classic "revenue up, profit not," but the decline has already narrowed to near flat.

The second is the index view. The CSI Construction Machinery Theme Index recorded revenue growth of +9.69% YoY and net profit growth of +0.75% YoY in the third quarter; net profit has now posted positive YoY growth for two consecutive quarters, and the earnings indicators show clear characteristics of a cyclical recovery.

The third is the sales-volume view. Excavator sales grew 23.1% from January to September 2026, of which domestic sales grew 16.3% and exports grew 30.4%. Sales volumes, jobsite activity and exports are all trending up at the same time, laying a foundation for next year's income statement.

The conclusion is not complicated: volume is rising, prices are rising, and FX is dragging its heels. An ugly income statement does not mean the business is getting worse. To track the monthly rhythm of sales and utilization rates, see Global Excavators Sell 570,000 Units a Year: Chinese Makers' Share Rises to 30%.

Three Takeaways for Buyers and Industry Practitioners

Leaders' cash flow and gross margins are improving, and their delivery and after-sales networks are more stable. SANY's gross margin rose to 28%, and Zoomlion's cash collection rate exceeded 103%, which means the ability to fulfill equipment supply, spare-parts supply and warranty commitments is strengthening.

Overseas localization has entered the deep-water zone. All three now draw more than half of their revenue from overseas; local manufacturing, channels and service outlets have replaced plain exporting as the new dimension of competition.

The replacement cycle and exports drive growth on two wheels; the procurement window is still open. Equipment placed in service during the 2016-2018 peak is gradually entering replacement cycles, and with equipment-renewal policies taking effect, the value equation for used equipment and complete machines is being reshuffled. If you plan to expand your fleet in the fourth quarter, first look at the negotiation window in Used-Equipment Inventory Down 10%: A Post-Market Money-Saving Guide, then wait for each maker's annual new products and pricing moves at bauma CHINA 2026.

If you need quotes for SANY pump trucks, electric loaders or complete machines, contact our sales team and we will provide a tax-inclusive landed price and configuration proposal within 24 hours.